Monthly Visual Checks vs. Licensed Annual Extinguisher Tags
Clear role boundaries so staff handle routine walkthroughs properly and book licensed vendors before tags expire.
Fire Extinguisher Monthly Visual Check vs. Annual Tag Log Builder
COMPLIANCE BOUNDARY: Staff perform monthly visual quick-checks only. Annual inspection tags and internal maintenance must be performed and punched by a licensed fire protection technician.
1. Project & Input Parameters
2. Interactive Verification Checklist
Side-by-Side Role Split
Check Frequency
Who Performs It
Core Verification Focus
Monthly Visual Check
On-site manager or designated staff
Access unobstructed, gauge in green, pin & seal intact, no visible corrosion, log initialed
Annual Tag Service
Licensed fire protection technician
Professional mechanical check, weight/component verification, official punched annual hang tag
Immediate Trigger
Licensed vendor upon discovery
Discharged unit, missing tamper seal, low gauge reading, or visible cylinder damage
Frequently Asked Questions
What should staff do if a gauge needle drops into the red recharge zone?
Do not wait for the annual date. Mark the unit out of service immediately and call your licensed fire protection vendor for prompt recharge or swap-out.
Where should the printed monthly log be stored?
Keep a printed copy in your front compliance binder or clipped near the back-of-house safety board where inspectors can verify it immediately.